Heavy duty Z axis reciprocating machine

Model:MTZA15

Equipment Introduction

The Z-axis reciprocator is a heavy-duty precision carrier that provides up and down motion for the spray gun.

Device Description

The spray gun holder is installed on the loading platform of the Z-axis reciprocating machine and is driven by a servo motor to achieve precise up and down reciprocating motion. The drive motor is installed in a semi-enclosed area below the reciprocating machine to ensure the stability and safety of the equipment.

Functions and features

Large load capacity: can be hung with more than 20 sets of automatic spray guns and 8 U-axes for stable operation

Flexible installation method: can be mounted on both sides, the spray gun installation method is highly expandable.

Servo motor drive: Use high-performance servo motor to ensure high accuracy of operation.

Multi-axis combination: can be used in combination with X-axis, Y-axis, U-axis and rotation axis to support spraying with complex motion trajectories.

Speed and acceleration adjustment: The operating speed and acceleration can be adjusted precisely to meet different spraying requirements.

Intuitive control interface: The controller interface is digitally displayed, and the operation is simple and intuitive.

Gear and toothed belt drive: Gear and toothed belt drive is adopted, which runs smoothly and does not require frequent maintenance.

No-jitter design: The gear belt transmission is tightly engaged to ensure no jitter.

Low noise: The toothed belt is equipped with steel wire to avoid elongation, and it runs without noise and turns without impact.

parameter

Load: 150kg

Stroke: Standard stroke can be 2000mm, 3200mm, customized size is accepted

Speed: 0.01-0.4m/s

Acceleration: 0.1-1.5m/s²

Accuracy: Repeat positioning accuracy ±0.1mm

Position detection: Absolute encoder

Communication method: Canopen/EtherCaT communication protocol

Drive parameters: 2kW, 3kW