X-axis reciprocating machine

Model:MTXT10

Equipment Introduction

The X-axis reciprocating machine is a precision carrier mechanism that provides horizontal motion for the reciprocating machine.

Device Description

The Z-axis reciprocating machine base is installed on the loading platform of the X-axis reciprocating machine, which is driven by a servo motor to achieve precise reciprocating motion back and forth. The drive motor is installed in a semi-enclosed area under the reciprocating machine to ensure the stability and safety of the equipment.

Functions and features

Servo motor drive: Use high-performance servo motor to ensure high precision of operation.

Multi-axis combination: can be used in combination with the Z-axis and Y-axis to support spraying operations with complex motion trajectories.

Speed and acceleration adjustment: The operating speed and acceleration can be adjusted precisely to meet various spraying requirements.

Intuitive control interface: The controller interface is digitally displayed, and the operation is simple and intuitive.

Gear and toothed belt drive: Gear and toothed belt drive is adopted to ensure smooth operation and no frequent maintenance is required.

No-jitter design: The gear belt transmission is tightly engaged to ensure no jitter.

Low noise: The toothed belt is equipped with steel wire to prevent stretching, so it runs without noise and turns without impact.

Trajectory programming: The control system can program the reciprocating machine's running trajectory to meet complex process requirements.

Multi-program storage: The controller can store multiple running program codes for quick switching.

parameter

Load: 300kg

Stroke: Standard stroke can be 1000mm, 1400mm, customized size is acceptable

Speed: 0.01-0.5m/s

Acceleration: 0.1-1.0m/s²

Accuracy: Repeat positioning accuracy ±0.1mm

Position detection: using resolver encoders

Communication method: Canopen communication protocol

Drive parameters: 0.4kW